DEWALT DCD776 18V Cordless Hammer Drill Driver, 13 mm Keyless Chuck, 42 Nm, 2-Speed, 15 Clutch Settings, Professional Drill Machine-A compact 18V lithium-ion cordless hammer drill with a 13 mm chuck, two speeds, and a hammer mode for light masonry work.
The DEWALT DCD776 is a professional cordless hammer drill driver for drilling, driving screws, and light masonry drilling. It runs on an 18 V Li-ion battery with a 300 W output, a no-load speed of 0-450 and 0-1500 RPM, and a 1.5-13 mm chuck capacity. The maximum torque is 42 Nm in the hard setting and 24 Nm in the soft setting, which suits both heavy fastening and delicate screwdriving. The hammer mode delivers up to 25,500 blows per minute for drilling into masonry. It has 15 torque adjustment positions, so you can set the clutch to stop at the right tightness without stripping screws. The compact body fits into tight spaces. It is made for carpenters, electricians, installers, and serious DIY users.
Key Features
18V Li-ion battery platform
42 Nm maximum torque (hard) / 24 Nm (soft)
Two speeds: 0-450 RPM for screwdriving and 0-1500 RPM for drilling
Hammer mode: up to 25,500 blows per minute for masonry
1.5-13 mm chuck capacity: takes a wide range of bits
15 torque (clutch) settings
Forward/reverse control
Compact body for tight spaces
Application
Drilling holes in wood, plywood, and MDF
Drilling in metal with suitable bits
Light drilling in brick and masonry (hammer mode)
Driving and removing screws and bolts
Carpentry, electrical, and installation work
Home, workshop, and site use
Technical Specification
Specification
Detail
Brand
DEWALT
Model
DCD776
Product Type
Cordless Hammer Drill Driver
Voltage
18 V, Li-ion
Output
300 W
No-load Speed
0-450 / 0-1500 RPM
Max Torque
42 Nm (hard) / 24 Nm (soft)
Chuck Capacity
1.5-13 mm
Impact Rate
Up to 25,500 BPM
Clutch Settings
15
Weight
Approx. 1.3 kg
Safety Note: Wear safety glasses and ear protection, and secure the workpiece before drilling. Check for hidden pipes and cables before drilling into walls. Use the correct bit for the material, and use masonry bits in hammer mode only. Charge the batteries only with the supplied charger, and keep them away from heat, water, and metal objects. Remove the battery before changing bits or accessories.
