A compact, lightweight 12V MAX (10.8V) lithium-ion cordless drill driver with two speeds, 24 Nm of torque, and an LED worklight.
The DEWALT DCD700 is a compact cordless drill driver for precise drilling and screwdriving. It runs on a 12V MAX (10.8V) lithium-ion battery and has a 180 W power output. The 2-speed gearbox gives 0-400 RPM for driving screws and 0-1500 RPM for drilling, so you can match the speed to the job. The maximum torque is 24 Nm, and the 15-position adjustable clutch lets you set the right tightness for different screws and materials without stripping them. The 10 mm keyless chuck changes bits quickly without a key. It drills up to 20 mm in wood and 10 mm in metal. The LED worklight lights up the work area, and the variable speed trigger and forward/reverse button give you control. At 0.91 kg without the battery, it is light enough for tight spaces, overhead work, and long use. It is made for electricians, carpenters, installers, and DIY users.
Key Features
12V MAX (10.8V) lithium-ion battery platform
2-speed gearbox: 0-400 RPM and 0-1500 RPM
24 Nm maximum torque
10 mm keyless chuck: quick bit changes, no key needed
15-position adjustable clutch: accurate screwdriving in different materials
LED worklight: lights the work area
Variable speed trigger and forward/reverse button
Drills up to 20 mm in wood and 10 mm in metal
Compact, lightweight body: 0.91 kg without the battery
Battery release button: quick battery changes
Application
Furniture installation and assembly
Electrical work and fittings
Drilling holes in wood
Drilling holes in metal
Driving and removing screws
Maintenance work and DIY projects
Technical Specification
Specification
Detail
Brand
DEWALT
Model
DCD700
Product Type
Cordless Drill Driver
Voltage
10.8 V DC (12V MAX), Li-ion
Power Output
180 W
No-load Speed
0-400 RPM (1st gear) / 0-1500 RPM (2nd gear)
Max Torque
24 Nm
Chuck Capacity
10 mm, keyless
Max Drilling Capacity (Wood)
20 mm
Max Drilling Capacity (Metal)
10 mm
Clutch Settings
15 positions
Weight (Without Battery Pack)
0.91 kg
Worklight
LED
Power Source
Cordless Li-ion battery
Safety Note: Wear safety glasses, and secure the workpiece before drilling. Check for hidden pipes and cables before drilling into walls. Use the correct bit for the material. Charge the batteries only with the supplied charger, and keep them away from heat, water, and metal objects. Remove the battery before changing bits or accessories.
